|
Company Homepage
Products (50)
|
DC Power Jack
Electronics characteristics:Rating: DC 12V, 1AContact resistance: 1kHz measured at small current (1A or less)Insulation resistance: a voltage of 500V DC shall be applied for a minute, and between conductors which should not make contact under normal conditions after which measurement shall be madeDielectric strength: between conductors which should not make contact under normal conditions 500V AC (50-60Hz) for 1 minute (trip current 2mA)Endurance characteristics:Solder ability: the terminals shall be dipped into soldering flux and shall be immersed into molten solder of 230+/-5 degrees for a period 3+/-0.5 secondsResistance to soldering heat: Solder temperature: 350+/-10Immersion depth: 2+/-0.5mmImmersion time: 3+/-0.5 secondsBy a solder iron to have capacity of 60WCold: the jack shall be stored at a temperature of -40+/-2 for 96 hoursIt shall be subjected to the controlled recovery conditions for 0.5 hours after which measurement shall be madeDry heat: the jack shall be stored at a temperature of -70+/-2 for 96 hoursIt shall be subjected to the controlled recovery conditions for 0.5 hours after which measurement shall be madeHumidity: the pin jack shall be subject to 90%-95%RH, 40+/-2 for 96 hours, and shall be conditioned at room ambient conditions for a period of 30 minutes
DC Power Jack with DC 12V and 1A Rating
Model: DC-002 Payment Terms: TT in advanced Minimum Order: 0
|
